Tripp Lite PDU PDU3VSR6G60A 6ft 16.2kW 3-Phase Switch PDU 60A Blue 0U Vertical

(No reviews yet) Write a Review
37.00 LBS

Out of stock

Frequently bought together:


Tripp Lite 3 phase Switched PDU / Power Distribution Unit offers advanced network control and monitoring with the ability to turn on, turn off, recycle or lock-out power to each individual receptacle, monitor site electrical conditions and remotely monitor output power consumption per-phase or per-receptacle. PowerAlert interface supports remote control and custom notification of user-specified conditions via email, secure web, SNMP, Telnet or SSH interface. Individually switched outlets can be controlled in real-time to remotely reboot unresponsive network hardware, or be custom programmed for user-defined power-up and power-down sequences to ensure proper startup of interdependent IT systems and prevent inrush-related overloads as network equipment is first energized. Unused PDU outlets can be electronically locked off to prevent the connection of unauthorized hardware. Built-in local digital display and remote web/network interface reports detailed voltage, amperage and kilowatt output values per outlet, per breaker bank and per phase with additional reporting options for power unbalance percentage, IP address and sensor based temperature and humidity data (requires ENVIROSENSE sensor).

• 16.2kW 3 phase 208V Switched Power Distribution Unit / PDU with built-in web/network interface

• Attached IEC-309 Blue 60A (3P+E) 208V 3 phase input; 6 ft. / 1.8m cord

• 0U, 70 inch / 178cm vertical form factor

• 18 switched 208V outlets (6 C13, 12 C19) in 6 separately breakered 20A single phase load banks

• Supports power-on, power-off or reboot of each outlet on a real-time or programmable basis

• Enables reboot of locked equipment, custom power-on/power-off sequences, load-shedding of optional loads and disabling unused outlets
PDU Type: Switched
Output Capacity Details: 16.2kW (208V) total capacity, 26A max per output phase (L1-L2, L2-L3, L3-L1), 20A max per breakered outlet bank, 16A max per C19 outlet, 12A max per C13 outlet
Frequency Compatibility: 50 / 60 Hz
Output Receptacles: (6) C13, (12) C19
Output Nominal Voltage: 208
Overload Protection: 6 20A circuit breakers, 1 per outlet bank
Customized Load Management Receptacles: Each outlet is individually controllable via remote interface
PDU Input Voltage: 208
Recommended Electrical Service: 60A 208V with IEC309 60A Blue (3P+E) outlet
Maximum Input Amps: 45
PDU Plug Type: IEC-309 60A BLUE (3P+E)
Input Cord Length (m): 1.8
Input Phase: 3-Phase

Reported Load Segments: Reports input current per phase (L1, L2, L3), plus output current for each output load bank (B1-B6) and individual output receptacle (1-18), Outlets are color-coded and labelled for phase and load bank identification, L1-L2 feeds black outlets (B1, B4), L2-L3 feeds dark-gray outlets (B2, B5), L3-L1 feeds light-gray outlets (B3, B6)
Front Panel LCD Display: Large digital display reports Amperage, Kilowatts, Voltage, Unbalance percentage, Temperature and Humidity information (requires ENIVIROSENSE option) Small digital display provides detail on the measurement the large display is reporting: Input-phase (L), Load bank (B), Sensor (S), Outlet (), Load unbalance % (UB), Output power (OP)
Front Panel LEDs Set of 6 LEDs: identify the value displayed on the large digital display: Amperage (A), Kilowatts (kW), Voltage (V), Unbalance percentage (%UB), Temperature (T), Humidity (%RH) One additional LED for each output receptacle offers power availability information: GREEN (Power ON, load bank capacity <80%), YELLOW (Power ON, load bank capacity >80%), RED (Power OFF/undervoltage), RED FLASHING (Power OFF/breaker trip)
Switches: Set of UP/DOWN arrow buttons scroll through available Input, Bank, Power, Load balance and Sensor options Additional MODE button advances the LEDs to view the next measurement
Material of Construction
Form Factors Supported
Vertical rackmount installation supported with included mounting brackets supports toolless mounting in button-mount compatible racks
PDU Form Factor
0U, Vertical
Relative Humidity: 5 to 95% non-condensing
Operating Elevation (msnm): 0 to 3000m (0 to 10,000 ft.)
SNMP Compatibility: Yes, pre-installed SNMPWEBCARD provides remote monitoring via web, telnet, SSH and SNMP management systems
Tested to UL 60950-1 (USA, Canada), Class A (Emissions), NOM (Mexico), RoHS compliant, TAA Compliant
Package Includes
Switched rackmount PDU with pre-installed mounting buttons
6 C13/C14 and 12 C19/C20 Plug-lock cable retention sleeves
Spare installation buttons (2 9mm / 4 6mm)
Rack mounting brackets
Owners manual
Item Dimension (L inchxW inchxH inch)
8 x 10 x 76
37.00 lb
Warranty Information
2-year limited warranty
View AllClose